Leyland P76 Owners 2006

Technical problem

How to open a locked boot.

by Hal Moloney
(ie when no key is available or lock has seen it years out)
1/ Take number plate off.
2/ Measure up 90 mm from the boot of the lid
3/ Measure out 35 mm to right of centre of boot lock [where key fits in]
4/ Use a 6.3 mm ( 1/4") drill bit.
5/ Drill hole where spot marked
6/ Insert Philip head screw driver and move from side to side Boo't should open.
7/ Place rubber grommet in hole
8/ Replace number plate

Last updated
Aug, 2006
This web site may contain Copyright material
If you find any problems with the site, please email the Web Editor